Getting ready to send air and fuel injectors to Brucato's. Is it a big deal to remove them?
Getting ready to send air and fuel injectors to Brucato's. Is it a big deal to remove them?
The air are easy. Be careful with fuel. There are two small holes on each side of fuel. You can use something to pull or pry in those holes alittle on each side at a time until out. Be careful not to break them cause they are pricey. I sent my to Simon motorsports who did a great job. Good luck.
Removal and/or replacement is not that difficult.
Covered fairly well above.... just don't forget to relieve the air and fuel pressure before beginning (fuel at the shrader valve on the Starboard rail, air at the scrader valve on the PORT rail).
A factory service manual would be a very good investment.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote