How does one go about setting the TPS on a 2002 300X ?
How does one go about setting the TPS on a 2002 300X ?
Easiest to do with a DDT or Computer Diagnostic System (dealer item).
Can be done with a volt meter also...... following the directions in the OEM Service Manual for testing TPS voltage.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
If only I had a service manual .............
Save your money. The TPS itself is NOT adjustable.
The only settings you'll be able to adjust would be the throttle arm itself (unless this engine has been modified.... I've seen a couple of Eric Simon's setups with an adjustable TPS link arm).
In either case- you'd want a DDT or Computer Diagnostic System connected to the engine to make any adjustments (or monitor the TPS readings).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote