looking for a mercury rigging kit that includes the hose & both ends for a '08 250xs
going on an '08 z-21 where do i find it?
looking for a mercury rigging kit that includes the hose & both ends for a '08 250xs
going on an '08 z-21 where do i find it?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HPz21 »</TD></TR><TR><TD CLASS="quote">looking for a mercury rigging kit that includes the hose & both ends for a '08 250xs
going on an '08 z-21 where do i find it?</TD></TR></TABLE>
Mercury's website has the entire kit
------Co-founder of Post Derailment, LLC---------
any idea the part number? i couldn't find it
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HPz21 »</TD></TR><TR><TD CLASS="quote">any idea the part number? i couldn't find it</TD></TR></TABLE>
here's the link
http://www.mercuryracing.com/a...t.php
------Co-founder of Post Derailment, LLC---------
I can set you up with one... give me a call on Monday.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Two different routes to go here (current retail prices listed as of time of post):
1. Complete RACING rigging tube kit (as pictured in above link): 32-842756T01 $142.54
2. Depending on your application, you can buy the "standard" boat tube and flange (32-825191A03 $53.00) and the 3L design "one piece lower cowling coupler" (843185T02 $23.30). Keep in mind, this tube is not "quite" the same size, but is suitable for most of your applications (and looks/functions the same as the racing kit above, except that it's a slightly smaller diameter). I use a LOT of these.
If you have a later style 3L engine, you may not even need the lower cowling flange. The 32-825191A03 hose kit will slide over the existing rigging coupler, and secure in place with a hose clamp.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
i got a 225 pro xs....which would u recommend
I would probably use the cheaper option... It's more than suitable for your engine.
If "space" in the rigging tube is a concern- use the Racing Kit. It's a little larger diameter, and comes with a "one-piece" lower cowling adapter.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
do u have these in stock and how hard to install myself???
thx in advance
Some in stock, some ordered (readily available).
Installation is mostly busy work... all rigging wires, hoses, etc. must be disconnected and re-rigged to install a new rigging tube.
Oil system must be bled when installation is completed.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote