well i try a 23 P 3 blade prop and i drop speed to 45.6 mph and gained 6100 rpms
tommorrow i going to go to a 24p and than a 25p so wish me luck
when i ran the 23p 3 blade i had a little taller roster tail and u can hear the engin reved up reall well
no the are some props that are like
MICHIAN PROPS new out of the box
Hmmmmm, no experience with those props. Weren't you running better with that 26 you had on there?
yeppers
i goign to get a 4 blade 24p tommorrow and a 3 blade 25p and then test them out
I'm curious how the 4 will run. I think you've get a fairly heavy rig there and a 4 blade might handle that load better. Let me know how it runs, Jimmie. I still think you have some setup issues to resolve and that boat should pick up at least 5 mph. Jackplate would be the first thing I would consider.
i'm running a 25p 5 blade on my old sled, handles great and come out of the hole screaming ,, BUT mpg sucks... i know where you can get a used jack plate.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bigfishingstud »</TD></TR><TR><TD CLASS="quote">i'm running a 25p 5 blade on my old sled, handles great and come out of the hole screaming ,, BUT mpg sucks... i know where you can get a used jack plate.</TD></TR></TABLE>
I know another guy looking for one, too. What is it and how much?
not sure i'll have to get ahold of Matthew ( my son ) he bought it for his boat and then didn't put it on
Sounds good Melvin. Let me know when you get the chance. Hey, is your club and/or members going to join the new BFL or just stay in the KBCF?
ya i going to try and get the better of the 2 and then try dropping 1 notch and i should be set right
i really happy with it right now but as i can tell not one happy going slow
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jiggernaut »</TD></TR><TR><TD CLASS="quote">Sounds good Melvin. Let me know when you get the chance. Hey, is your club and/or members going to join the new BFL or just stay in the KBCF?</TD></TR></TABLE>
i'll get ahold of him tomorrow,,, not sure what we are going to do ' got meeting monday nite ,, if i was a betting man i would say that they stay with KBCF
I would say that the 4 blade would give you a better hole shot and handling but might lose top end ( but you already new that) if any one is looking a used jackplate let me know 6" vance jackplate whoza_daddy2002@yahoo.com
Reply With Quote