Minkota Dealer/service?

[JC25]

Got up on some rip rap and bent up my prop shaft on my maxxum the prop didn't break but the shaft is warped. Anyone know who would/could fix this locally?

[Mike Daleo]

A2O in clarksville is an authorized MK service center.

[john n]

Jeff - Ditto on AO2 in Clarksville - see my I'M first.

John N

[JC25]

IM sent its a 70lb thrust

[john n]

I have it - you have an I'M

John

[Z20basser]

My experience with A2O is this: Those guys are a joke!!!!!!!

[Mike Daleo]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stratos201basser &raquo;</TD></TR><TR><TD CLASS="quote">My experience with A2O is this: Those guys are a joke!!!!!!!</TD></TR></TABLE>

How do you mean?

[Z20basser]

Been getting the run around on a part for my trolling motor since May 13. After a while I got tired of calling them and explaining to them the problem over and over. (at least 4 times over the course of 2 months) I would call and talk to the same guy and he would have no clue who I was or what I needed every time.

[Mike Daleo]

I see. They were very good to me on my TM repair. Kinda put me ahead of everyone else because I had to leave. I can't say the guy running the place was very friendly but he got it done.

I sent my wife in there lst week for something and she said he was rude to her. That kind of stuff takes care of itself over time.

In a pinch they are still a good service center.

[201pro]

Jason, Do you need me to get that thing fixed for ya?.. I am tired of having to put the rope in the rod locker just so we can make a run!!!

[hulapopr]

poplar level rd,b&j marine....super nice place to do bidness,,
just order the parts and do it yourself,it isn't hard at all.just be sure to get new seals too..

[ranger1055]

for B&J Marine on Poplar Level

[Mike Daleo]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ranger1055 &raquo;</TD></TR><TR><TD CLASS="quote"> for B&J Marine on Poplar Level </TD></TR></TABLE>

really?

[uk2thdoc]

A2O fixed my TM same day and gave me a free t-shirt to boot. Not much negative to say from my experience.

Doc

[dpage70]

Try R&W, they're Minn Kota certified.

[Mike Daleo]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dpage70 &raquo;</TD></TR><TR><TD CLASS="quote">Try R&W, they're Minn Kota certified.
</TD></TR></TABLE>

I would rather help you fix it then send you to R&W.

David, didn't you get yelled at down there for not spending money at that moment?

[JC25]

John N came over yesterday evening and brought me a spare armature that he had! it was a little off on shaft length so I will be getting one from B&J and installing it myself after being schooled by a true pro! Thanks again John for taking time out to help a fellow BBC member in need!

[S.Curtsinger]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JC25 &raquo;</TD></TR><TR><TD CLASS="quote">John N came over yesterday evening and brought me a spare armature that he had! it was a little off on shaft length so I will be getting one from B&J and installing it myself after being schooled by a true pro! Thanks again John for taking time out to help a fellow BBC member in need!</TD></TR></TABLE>

[Slow Rollin]

I must say John is a super nice guy.

[Joe Skeeter]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JC25 &raquo;</TD></TR><TR><TD CLASS="quote">John N came over yesterday evening and brought me a spare armature that he had! it was a little off on shaft length so I will be getting one from B&J and installing it myself after being schooled by a true pro! Thanks again John for taking time out to help a fellow BBC member in need!</TD></TR></TABLE>