Results 1 to 3 of 3
  1. #1
    Member k2rider18's Avatar
    Join Date
    Aug 2007
    Location
    Weatherford, TX
    Posts
    827

    1990 rude 175 xp

    Question for the wise folks,

    What is the pressure that most of the experienced anglers like to see on there older outboards. Its mated up to a 1990 Stratos 285 with a 6" jp, and a raker 24". Since the impeller has been change is has never risen above 12 to 13 PSI @ WOT. Is this recommended or should I be expecting more PSI. The plate was sitting at the recommended height from the local mechanic i think it was somewhere around 3.5 below....dont remember... Lemme know what yall think!!!!

    Kyle Smith
    Texas Boat Works, Fort Worth, TX
    2007 Dodge Ram 2500 6.7 4x4 (Deleted)
    2011 Bass Cat Eyra 250 Pro XS
    BASB0805G011 / SN: 2B017333

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,218
    #2

    Re: 1990 rude 175 xp (k2rider18)

    What was the pressure before he replaced the impeller?

  3. Member k2rider18's Avatar
    Join Date
    Aug 2007
    Location
    Weatherford, TX
    Posts
    827
    #3

    Re: 1990 rude 175 xp (ChampioNman)

    I want to say right around 15 at the most
    Kyle Smith
    Texas Boat Works, Fort Worth, TX
    2007 Dodge Ram 2500 6.7 4x4 (Deleted)
    2011 Bass Cat Eyra 250 Pro XS
    BASB0805G011 / SN: 2B017333

Similar Threads

  1. 1990 Rude 175 Bogs down....
    By k2rider18 in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 07-09-2010, 07:36 AM
  2. 1990 Rude 150 Xp missing on top end
    By Buckeyebasser23 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 05-12-2008, 09:41 AM
  3. 1990 Rude 200 XP - trim/tilt?
    By DG in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 12-14-2005, 04:36 PM
  4. 1990 Rude 200 XP
    By DG in forum Evinrude/Johnson Motors
    Replies: 10
    Last Post: 09-26-2005, 05:01 PM
  5. 1990 Rude 200XP pitfalls?
    By billyboy in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 04-15-2005, 03:19 AM