Page 1 of 2 12 LastLast
Results 1 to 20 of 38
  1. #1
    Member Mike Daleo's Avatar
    Join Date
    Jun 2004
    Location
    Shelbyville, KY
    Posts
    16,332

    Finally, I am done.................

    Winter projects are complete. They include:

    New carpet
    New seats
    New lighting
    Vents for gas tank
    Recessed Pro-Control Tray
    Two new tires
    New 10" Jackplate
    New Prop (26 TR04Powertech)
    Fixed boat cover(I hope)

    I have been working on her for 4 hours today, she is washed, she is waxed, she is chock full of gas, chock full of Yamalube, tire pressure perfect, she is packed. I am ready for the first FOM. here are the pics.











    The only thing left to do is to put the rods in the locker and that is where I could use some help. The old rod tubes were beaten up pretty bad. I need 7 rod tubes, but they are bigger than the size you find most places. Meijer's has them for .98 cents, but they are too small. Same thing at Kmart. anyone know where I can get these before Thursday?

  2. Member Mike Daleo's Avatar
    Join Date
    Jun 2004
    Location
    Shelbyville, KY
    Posts
    16,332
    #2

    Re: Finally, I am done................. (mikedaleo)

    I guess I could use a new digital camera. No detail in these pics at all.

  3. Member
    Join Date
    Jun 2004
    Location
    Lexington
    Posts
    1,660
    #3

    Re: Finally, I am done................. (mikedaleo)

    I was thinking that the pics didn't do it justice. Looks really good anyway! Now its ready to sell



  4. Member
    Join Date
    Jun 2004
    Location
    Lexington
    Posts
    1,660
    #4

    Re: Finally, I am done................. (mikedaleo)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mikedaleo &raquo;</TD></TR><TR><TD CLASS="quote"> Meijer's has them for .98 cents, but they are too small. Same thing at Kmart. anyone know where I can get these before Thursday?</TD></TR></TABLE>

    I've read on here that people have used the tubes that come in golf bags...might be the same as what you've found already...just an idea.



  5. Member
    Join Date
    Jun 2004
    Location
    Seymour, IN
    Posts
    6,508
    #5

    Re: Finally, I am done................. (Everlytriton)

    Looks awesome Mike!!

  6. Moderator Daniel's Avatar
    Join Date
    Sep 2004
    Location
    Greensburg,Ky
    Posts
    9,695
    #6

    Re: Finally, I am done................. (Stratos201basser)

    Looks good! Now you're ready to go get it dirty!

  7. Member Mike Daleo's Avatar
    Join Date
    Jun 2004
    Location
    Shelbyville, KY
    Posts
    16,332
    #7

    Re: Finally, I am done................. (Daniel)

    I am sure it will rain on the way to the lake Thursday night now. Started with Meguire's Fine Cut Cleaner, then the wax. My arms are jelly.

    Those golf tubes are exactly what I need, but I can only find the small diameter ones. If I don't find them, I am gonna need to remove this rod rack.

  8. Semper Vigilans kybaitcaster211's Avatar
    Join Date
    Dec 2006
    Location
    Union, Ky.
    Posts
    6,962
    #8

    Re: Finally, I am done................. (mikedaleo)

    Looks good Mike, Great Job.

  9. Member Brian Craft's Avatar
    Join Date
    Jun 2004
    Location
    South Bend, Indiana
    Posts
    1,761
    #9

    Re: Finally, I am done................. (kybaitcaster211)

    Looks like a new boat Mike

  10. Member
    Join Date
    Jan 2006
    Location
    Elizabethtown
    Posts
    3,491
    #10

    Re: Finally, I am done................. (mikedaleo)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mikedaleo &raquo;</TD></TR><TR><TD CLASS="quote">Those golf tubes are exactly what I need, but I can only find the small diameter ones. If I don't find them, I am gonna need to remove this rod rack. </TD></TR></TABLE>

    Mike have you tried Dick's for the tubes? I think that's where my buddy got his for his golf bag. My golf bag has the smaller tubes in it and his were bigger (be nice) so I think that would be the ones you need if they have them.

  11. Member Mike Daleo's Avatar
    Join Date
    Jun 2004
    Location
    Shelbyville, KY
    Posts
    16,332
    #11

    Re: Finally, I am done................. (dpage70)

    Yeah, I looked at Dick's and they stopped carrying them alltogether.

  12. Member
    Join Date
    Jun 2004
    Location
    Kuttawa, KY
    Posts
    2,878
    #12

    Re: Finally, I am done................. (mikedaleo)

    Mike, I have a set of tubes that came out of my old Skeeter. If you can use them, you are welcome to them. Give me some measurements and I'll check them, or let me know when you are coming this way.

  13. MSU Percussion Professor bmas13's Avatar
    Join Date
    Oct 2006
    Location
    Morehead, KY
    Posts
    2,416
    #13

    Re: Finally, I am done................. (mikedaleo)

    REALLY fine job Mike!! I think she looks amazing! You should feel very good about what you have done.



  14. Member flippindrew's Avatar
    Join Date
    Aug 2005
    Location
    Richmond
    Posts
    2,940
    #14

    Re: Finally, I am done................. (bmas13)

    lookin good, now put some fish in it!

  15. Member
    Join Date
    Feb 2006
    Location
    Columbia, SC
    Posts
    12,602
    #15

    Re: Finally, I am done................. (flippindrew)

    cant wait until buck spills the dip-n-die
    Art Carney - Licking the mops at Porcini's since 2009.

  16. Member Mike Daleo's Avatar
    Join Date
    Jun 2004
    Location
    Shelbyville, KY
    Posts
    16,332
    #16

    Re: Finally, I am done................. (buzzking2001)

    tube diameter is 1 5/8"

    I don't mind spit, blood, or mud. I just hate catfish slime

  17. Member
    Join Date
    Feb 2006
    Location
    Columbia, SC
    Posts
    12,602
    #17

    Re: Finally, I am done................. (mikedaleo)

    oooooo me too, that stuff is like trying to rid your hands of.......oh, nevermind.
    Art Carney - Licking the mops at Porcini's since 2009.

  18. Moderator Passion 4 Bassin's Avatar
    Join Date
    Jan 2005
    Location
    Sellersburg, IN
    Posts
    10,261
    #18

    Re: Finally, I am done................. (mikedaleo)

    It looks brand spanking new!!

  19. Member
    Join Date
    Nov 2004
    Location
    Lexington
    Posts
    2,315
    #19

    Re: Finally, I am done................. (Passion 4 Bassin)

    I am going to look really good this year while I net your fish. Kyle, I have a tendancy to bleed quite often while fishing and a catfish or two has been known to suck down my baits. I am sure I will muck it up fairly quickly. Looks good now though.

    Buck

  20. Indiana Bass Club Moderator billius's Avatar
    Join Date
    Feb 2005
    Location
    Richmond, Indiana
    Posts
    62,765
    #20

    Re: Finally, I am done................. (mikedaleo)

    Mike your rig looks great! You've put a ton of work into it and it shows.
    Bill Gard
    Richmond, Indiana
    2015 BassCat Caracal/225ProXs
    TEAM SHERM'S MARINE
    Of course I talk to myself...sometimes I need expert advice.

Page 1 of 2 12 LastLast

Similar Threads

  1. Finally
    By R.D. in forum Kansas Fishing
    Replies: 17
    Last Post: 08-10-2011, 05:23 AM
  2. finally
    By junior77 in forum Kansas Fishing
    Replies: 8
    Last Post: 06-20-2011, 06:08 AM
  3. Finally
    By bigfishingstud in forum Kansas Fishing
    Replies: 2
    Last Post: 04-03-2011, 07:58 AM
  4. Finally
    By BooBoo in forum North Carolina Fishing
    Replies: 0
    Last Post: 07-11-2009, 05:57 PM
  5. I FINALLY HAD ENOUGH!!!!!!!!!
    By fishergal in forum Texas Fishing
    Replies: 27
    Last Post: 07-09-2006, 01:51 PM