Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jun 2011
    Location
    Clarksville TN
    Posts
    320

    Flywheel Swap, Model and Serial Numbers are inside of post...

    I have a J200STLCCM ser#G 7743538 that has lost a tooth or two, I have a donor flywheel from a TJ150SLCEM ser#R 08187848

    Will these inter-change?
    Thanks
    Jay

  2. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #2

    Re: Flywheel Swap, Model and Serial Numbers are inside of post... (GasCan)

    go to http://www.shop.evinrude.com and click on PARTS, look up motors and compare part numbers.
    -----


    A Technical troubleshooter possessing more tools than talent !

  3. Member
    Join Date
    Jun 2011
    Location
    Clarksville TN
    Posts
    320
    #3

    Re: Flywheel Swap, Model and Serial Numbers are inside of post... (SEAHORSE)

    The part numbers are different, I knew that, I was asking if they interchanged and would work. Most of the time the information on the internet does not go into detail enough to explain that there are other parts that are interchangable...

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,218
    #4

    Re: Flywheel Swap, Model and Serial Numbers are inside of post... (GasCan)

    http://www.bbcboards.net/zerothread?id=688521 check out this post the flywheel and carbs will work on your motor.

Similar Threads

  1. Serial Numbers
    By ksgoodfish in forum Mercury Motors
    Replies: 5
    Last Post: 01-28-2012, 05:34 PM
  2. Serial Numbers
    By TNStratos1 in forum Stratos/Javelin Boats
    Replies: 3
    Last Post: 06-19-2008, 02:51 PM
  3. Why does my post have pics inside and not a contain image on outside of post?
    By champ_alfred in forum Help with Boards/Posting/Videos, etc.
    Replies: 3
    Last Post: 02-26-2008, 05:55 PM
  4. Model & Serial numbers
    By HDVROD100 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 08-14-2007, 08:11 AM
  5. help from the ficht masters... a year 2000 200hp (serial #inside)
    By SmallieChaser in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 11-05-2006, 02:28 PM