Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Nov 2004
    Location
    HEALDSBURG Ca.
    Posts
    4,614

    UFP A60 question

    Going from drum to disk breaks and would like to know what the differance is in the A60. I think with drum there is no use for the solenoid.
    And with disk, you need to hook up the blue wire(from the solenoid) to back up light? Am I close???? Thanks
    BILLY. 1995 202DCX ELITE TEAM FATBOY
    & 2000 tracker PT185
    2015 Fish count
    Days on the Water =5.
    Big fish 1-5.5
    Big fish 2-5.00000
    Big fish 3-4.0
    Big fish 4-3.0smallmouth
    Big fish 5-@2.50

  2. Member
    Join Date
    Dec 2009
    Location
    Alabama
    Posts
    1,062
    #2

    Re: UFP A60 question (BILLY)

    I think the only difference is the Master Cylinder as the drum brakes may require a different pressure.

    You are correct on the backup light wire to the solenoid.

    I just ordered a new A-60 inner slide unit for my 11 year old trailer with disk brakes.

    This place has the parts and manuals online in PDF files.
    http://www.pacifictrailers.com/

  3. Member
    Join Date
    Mar 2005
    Location
    Winchester, TN
    Posts
    1,523
    #3

    Re: UFP A60 question (nmanley)

    Actually all component internally are the same. The drum master cylinder has a plug where the return line goes if a solenoid is added for discs. All master cylinders on UFP actuators are the same.

  4. Member
    Join Date
    Nov 2004
    Location
    HEALDSBURG Ca.
    Posts
    4,614
    #4

    Re: UFP A60 question (DABS)

    BILLY. 1995 202DCX ELITE TEAM FATBOY
    & 2000 tracker PT185
    2015 Fish count
    Days on the Water =5.
    Big fish 1-5.5
    Big fish 2-5.00000
    Big fish 3-4.0
    Big fish 4-3.0smallmouth
    Big fish 5-@2.50

  5. Member
    Join Date
    Dec 2009
    Location
    Alabama
    Posts
    1,062
    #5

    Re: UFP A60 question (DABS)

    Good to know. Thanks

Similar Threads

  1. Lazy Sunday question, PTO system question.
    By Bitman in forum Stratos/Javelin Boats
    Replies: 1
    Last Post: 10-05-2008, 09:39 AM
  2. Oil/Fuel Leak Question - Water Pressure Gauge Question - HELP Please
    By trophy01 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 05-28-2008, 09:36 AM
  3. Age Old Question, 200HP E-TEC, Oil Question....Again
    By Sambone in forum Evinrude/Johnson Motors
    Replies: 98
    Last Post: 03-11-2008, 06:11 PM
  4. prop question & rpm question
    By pete 1 in forum Yamaha Motors
    Replies: 4
    Last Post: 02-12-2007, 01:17 AM