Results 1 to 3 of 3
  1. #1
    Triton4us
    Guest

    OIl bath hubs, how much??

    I am getting ready to change out the oil on my 04 triton MMT trailer oil bath hubs, bearings are fine just want to change out oil. How much oil will they hold, and what brand and weight should I buy?? What is also the best way to refill oil?? Thanks..

  2. Member
    Join Date
    May 2004
    Location
    Gray
    Posts
    10,476
    #2

    Re: OIl bath hubs, how much?? (Triton4us)

    Call Robbie at Bunch Marine. 865-376-7227

  3. Member
    Join Date
    Feb 2005
    Location
    San Diego
    Posts
    901
    #3

    Re: OIl bath hubs, how much?? (Triton4us)

    Use straight 50 wt detergent motor oil....make sure the oil is warm or it will take forever to fill, and fill to the bottom threads of the fill hole.....apply red high RTV temp silicone sealant to the threads of the fill plug threads and torque to 8-10 ft lbs...

Similar Threads

  1. Oil Bath Hubs
    By Chuck from Ky. in forum Trailers & Towing
    Replies: 6
    Last Post: 03-27-2011, 02:09 PM
  2. Oil Bath Hubs
    By SETDHK in forum Trailers & Towing
    Replies: 1
    Last Post: 02-13-2011, 06:21 AM
  3. Oil bath hubs
    By leethefishking in forum Trailers & Towing
    Replies: 24
    Last Post: 01-27-2011, 04:22 PM
  4. Oil bath hubs?
    By herndonpro in forum Trailers & Towing
    Replies: 1
    Last Post: 04-18-2008, 08:29 AM
  5. Oil Bath Hubs
    By Blanked Again in forum Skeeter Boats
    Replies: 1
    Last Post: 09-28-2007, 01:39 PM