New, "to me", 2003 Triton TR186, 150 Merc. XR6

[coachfish]

I got a great deal on this bass boat. Motor runs sweet. Boat is solid. I am in the process of cleaning and waxing. Quite a bit of oxidation, the boat is white. Any suggestions on products that do a good job of getting the oxidation off and a good wax to use?

Coachfish

[Skeet'r89]

Go to the restoration forum. You should be able to find some answers there.

Welcome to the BBC !!!

[cougarcat22]

+1 on restration forum and Congrats on your rig.

[jclark408]

http://www.google.com/products...wIwAA#

if you can, get you one of these..........they also sell them combined with a pad kit for various levels of cutting ability.......the kit can be found online for less than $200............pick up a couple of bottles of Meguires compounds as they are numerically labeled to reflect their cutting ability (harshness)..........I would recommend ending with 3M Finish It compound then a good carnauba based wax, then keep it maintained after each trip with a marine detailer such as BBS or BTS protectants to stop staining on the water line area due to the hull being white

[drfish]

3M makes a good cleaner/wax that will take quite a bit of the oxidaton off a white boat. Takes some rubbing, but you can do it by hand if you don't want to get involved with the rotary equipment.