Fuel Line Cover

[Hardhead1]

That cover's the fuel line that lays in the splash well, looking to change color and don't know where to find the " mess Sock ". any ideas ?
tks

[basshole45]

also search for" rigging hose" in the search area... you should bring up all the links,, im thinking it was clearstreamco.com that had the braided covers,,and maybe eddiemarine that had the plastic...may have to check that eddie marine one after you search but should bring alot options up TH marine also carries the zippered sleeves if you would want to go that route

[Hardhead1]

Thanks Gary, looked at the zipper one saturday but it was way to long, I'll go look at the sites you mentioned.

[JeffA]

i would think where ever they get the stuff to make the stix jackets and rod gloves, its the same stuff, just need the bigger diameter.

[JeffA]

i'd look here.
http://cableorganizer.com/wire-management/

[Hardhead1]

Thanks Jeff.

[jbpainter]

this is the place to get it cheap. I bought a bunch and made my own rod socks out of it. Really easy to order and it came the next day.

http://www.buyheatshrink.com/b...g.htm

[Tennessee Top]

Instead of the braided/mesh/sock material, what if you wanted to use the plastic material that resembles a wetvac hose? Would imagine computer stores carry these but have not searched.

I have the hose on the OptiMax that covers the fuel line and it looks like the wetvac/shopvac hose. It is actually a part/kit you order from Mercury and too large for the graphs application.

Believe it would look better to have matching material instead of a mesh on the console and a plastic hose on the stern.

Any ideas on websites that may carry this type of cable covers?

[DelawareDave]

The Zippered Covers Come From T&H Marine, They Come In 2 Sizes 36" & 46"

[Hardhead1]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by DelawareDave &raquo;</td></tr><tr><td class="quote">The Zippered Covers Come From T&H Marine, They Come In 2 Sizes 36" & 46" </td></tr></table>

my lines are 27"
tks anyway.

[Jim Dunn]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by b*******45 &raquo;</td></tr><tr><td class="quote">also search for" rigging hose" in the search area... you should bring up all the links,, im thinking it was clearstreamco.com that had the braided covers,</td></tr></table>

I tried the above website and Firefox told me it wasn't a trusted web site. What's up with that?

[mduncan62]

Firefox? that's the problem.

[racefan]

http://www.buyheatshrink.com/b...g.htm must buy a bulk


http://cableorganizer.com/wire-management sells by the foot

[racefan]

http://cableorganizer.com/f6-wrap-around/

wrap around loom so you can just split the mess and slip over wires and cables. I will be using this stuff so I will not have to unhook cables and wires and will use as a rigging cover also.

[StratosDadRI]

Home Depot 6' shop vac hose $20.00, zig saw fine blade cut it on the molded seam cut to length. Slip right over existing cables, hoses.

[RipNLips]

Here you go Mike.
http://www.cabletiesandmore.co...g.php

[ChampRunner204]

[quote=jbpainter]this is the place to get it cheap. I bought a bunch and made my own rod socks out of it. Really easy to order and it came the next day.

Joel what size did you use to make the rod socks?

[jbpainter]

i think i used 1 1/4" for the casting rods, and 1 1/2" for the spinning rods.

[ChampRunner204]

Thanks