I have an 88 Ranger 364V. I just purchased Night Blaster package from Bluewater LED. Is there anyway to hide the wires on the deck. This thing is so foam filled its a pain... any help would be greatly appreciated. The lights are awesome by the way.
I have an 88 Ranger 364V. I just purchased Night Blaster package from Bluewater LED. Is there anyway to hide the wires on the deck. This thing is so foam filled its a pain... any help would be greatly appreciated. The lights are awesome by the way.
On the last Ranger I did, I drilled small holes and dropped the wires in to the hatches. The foam filling is a royal pain, but was pretty soft and easy to cut through. Basically I drilled the small hole for the lights and then used a grommet (sp?) tool to cut up through the foam to behind the drilled hole. Def took some time but it can be done!
There are a few small tricks to make things look more factory. Do you have rod straps? You can always pull the rod straps and punch into the locker through there. Wherever you go, if you use a little black hot glue to conceal the wires they will just look like part of the fixture and clean it up.
Reply With Quote