Does this count as bling?

[21XDC]

I was bored today and did some painting ....... 27T1

It should hold up with devcon 2 ton epoxy over the paint. What a PITA.

Before:



After:

[GhostComanche]

Yep, it does; That right there is slick.............................Roger

[colreb2000]

Looks good

[wildkat7]

Me likey....need to do that for mine....

[TritonTimTR19]

Looks like bling to me.........What were your steps in the process as far as priming and did you use a special paint?

[21XDC]

I used an air brush with acrylic water base paint and then just clear coat over with epoxy. Not sure if it will hold up to 85+ mph. I think it will. I wiped the area good with acetone first.

[ASTROCRAZY]

Looks sweet,
Jeff

[matt481VS]

cool!

[PetiteBass]

Dang Mike...looks like it's gonna be a very long winter for ya!

P.S. Looks good!

[21XDC]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PetiteBass &raquo;</TD></TR><TR><TD CLASS="quote"> Dang Mike...looks like it's gonna be a very long winter for ya!

</TD></TR></TABLE>

[MFD911]

Looks good hope it holds up.

[fmm1]

Very sharp!

[MIZ-ZOU]

Uh, oh. Your prop is out of balance now...

[genemelow]

looks great

[bassfanatic5]

Looks great Mike, winter must be dam slow over there. We look forward to winter here, great time to catch ozzie bass.

Damien

[21XDC]

The water is hard, For 6 months.

Thanks for the compliments guys.

[TritonTimTR19]

Did you thin out the epoxy and brush it or justmix and brush it..

[21XDC]

I airbrushed the paint and let it dry. Then cleaned off the over spray. Then I used the epoxy w/o thinning, used a brush and let it set up good. Then took a razor blade and cut off any overage. May not be the best way, But it's on there for now..