I'm in the process of re-carpeting my Triton and think I want to put in a recessed
tray for my trolling motor. Any recommendations on brands etc. for the best bang
for the buck....thanks. Donm
I'm in the process of re-carpeting my Triton and think I want to put in a recessed
tray for my trolling motor. Any recommendations on brands etc. for the best bang
for the buck....thanks. Donm
I have used a comfortroll twice in 2 different boats and really like it. All metal with curved heel section make it look more factory.
This is my TR-21 with one of our kits installed. You'll wish you had installed one a long time ago!! The kits are $89 to your door, (lower 48). Let me know if I can help in any way. MM
I can also color match the Tritons pretty easy if interested or have any questions, email me sales@trollwell.com.
Proud BBC SPONSOR - Hand Made in USA
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by MM »</td></tr><tr><td class="quote">This is my TR-21 with one of our kits installed. You'll wish you had installed one a long time ago!! The kits are $89 to your door, (lower 48). Let me know if I can help in any way. MM
No doubt about it, that's the best value. I scratch built one, and I can assure you the time spent and the weight, makes buying this one above at a great price the best option by a long shot
MM - Looks great and I have a TR 20 with same trolling motor so It would be very similar to your photo. I want order one should I call your listed co. phone, send info to your e-mail address or go to your company website? Thanks for your help...donm
I will be giving you a call as well...I am interested in a tray for my 201 pro
Mark,
I have the same MotorGuide Tour Edition 24Volt 70lb thrust trolling motor and am interested in one also. I am refurbishing my 89' 374V Ranger and this was on the to-do list. I will contact you shortly.
Thanks,
Darren.
Troutgnat.
Gentlemen,
I ordered mine today. Mark's a great guy, knowledgeable and helpful. You should give him a call.
Troutgnat.
Just wanted to let all know I received my tray and it is all Mark said it would be....very pleased with and a big thangs to Mark for his help. donm
R & R Design Inc. makes a nice trolling motor tray as well. They are made of Powder coated aluminum, UV protected, Universal to fit any style of trolling motor.
You will definetaly wish you installed one of these sooner. I have had three boats so far. One came with it already installed and the other two i had to install one. But it was one of the first add ons i make. It will save your back and make you more stable on your boat.
We are selling these for $69.99.
Please Call or Visit our website to order.
Modified by threeriversmarine at 5:44 AM 1/23/2012
Authorized Dealer & Seller for Lowrance, Humminbird, Garmin, and many other major marine electronics manufacturers.
Proud BassBoatCentral Sponsor since 2006!
One thing that concerns me that I found doing my restore is that the drain tubes that these have which go to the hull center, at least on my 93 stratos, there was no drainage from anywhere in the front to the hull. Any water that came in anywhere in the front just got trapped between the foam and the stringers and eventually rotted the stringers. I have since added holes and made up for the lack but my boat cannot be the only one with this design. Its just that someone might put one of these in and think that running the tube to the hull and they are all good might not be right. No, it probably wouldnt be tons of water going in and might not be a problem but over time, it just might. Especially if it gets trapped in the foam surounding the wood that was cut (and I hope resin sealed afterward) or that wood will become a soft spot, I am certain.
Reply With Quote
