I am trying to remove the old registration stickers off my new to me boat and the annual stickers came right off. The number stickers are not even thinking of coming off. I tried a little heat from a heat gun and that won't touch them. Any ideas? Don't want to use any chemicals that will harm the gel coat on the outside.
heat gun and a razor blade mine came off in little chips. Just be carful not to dig into the fiberglass. Then I used goof off to get the residue off good luck
starting fluid(ether)
CHUNKIN' AND WINDIN'
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by haulingbass »</td></tr><tr><td class="quote">heat gun and a plastic scraper</td></tr></table>
+1
BPS card and hair dyer, Get it to bunching up, grab with fingers, keep heat going, pull. Do that a million times !
Patience and time
**
Life is kinda hard but it's
better than the other options .. er ..option !
I had a buddy at a body shop that used a neumatic tool that had a thing that was like a big eraser on the end of it. Took only a couple minutes to remove and there was no damage to the gel coat.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by davidikus »</td></tr><tr><td class="quote">I had a buddy at a body shop that used a neumatic tool that had a thing that was like a big eraser on the end of it. Took only a couple minutes to remove and there was no damage to the gel coat.</td></tr></table>
thats called a stripe eraser...got one of them at the shop im gonna use to take mine off....you can get them at any parts store
Reply With Quote