Rubber mat for bow

[wassupc]

I want to adhere a rubber non-skid mat on the bow to step on. Where is the best place to get it and does anyone have clever ways to install?

Thanks

[Largemouthlou]

C&O Marine

http://www.candomarineparts.com/NonSkid.html

Get a little more then ya need cut a thin card board templet of what ya want and then use it to cut the mat, make all corners round and end all edges at least a 1/4" from and turn downs in the top cat to the hull.. Also lay out in the sun to get it warm and plyable

[Ridge Runner_20]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Largemouthlou &raquo;</TD></TR><TR><TD CLASS="quote">C&O Marine

http://www.candomarineparts.com/NonSkid.html

Get a little more then ya need cut a thin card board templet of what ya want and then use it to cut the mat, make all corners round and end all edges at least a 1/4" from and turn downs in the top cat to the hull.. Also lay out in the sun to get it warm and plyable </TD></TR></TABLE>

Exactly what he said! A couple things I'll add. Use a high quality 3M vinyl adhesive to secure the mat. Once it's in place an cured, use black indoor/outdoor silicone to seal the edges. This gives it a nice, finished look and makes it far less likely to peel back.

Good luck!

RR_20

[LrgMouthCatcha]

There is a non skid mat on sale at cabelas right now... type the product # in the search bar and it should come up The product # is: FTX016359. Hope this helps

[AZ River Rat]

I bought mine from HYDRO-TURF.COM. They use 3-m tape on the back. It's the same mat that is used on jet skis.

[mcgaff1]

http://www.stewartssurestep.com/products.cfm try here I used them

[Higgy]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Largemouthlou &raquo;</TD></TR><TR><TD CLASS="quote">C&O Marine

http://www.candomarineparts.com/NonSkid.html

Get a little more then ya need cut a thin card board templet of what ya want and then use it to cut the mat, make all corners round and end all edges at least a 1/4" from and turn downs in the top cat to the hull.. Also lay out in the sun to get it warm and plyable </TD></TR></TABLE>
Lou's on the money and the non skid material from C&O already has the glue on the back side...a fine product from some of the best people to deal with

[cart7]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mcgaff1 &raquo;</TD></TR><TR><TD CLASS="quote"> http://www.stewartssurestep.com/products.cfm try here I used them </TD></TR></TABLE>

I emailed them. The 36" x 52" mat is $75. That's a very good price.