I had a flasher in the dash and it has come apart. Don't need to replace flasher but would like to plug hole to make it look better. Any suggestions?
I had a flasher in the dash and it has come apart. Don't need to replace flasher but would like to plug hole to make it look better. Any suggestions?
I believe I have seen some large black colored hole covers in some of the boating catalogs, like West Marine or US Boats. They were specifically made to cover larger holes, such as from a flasher. I know I have seen them, just can't remember off hand which catalog they were in.
Modified \'92 Procraft 170 Combo/\'97 Johnson 130<U></U>
ProCraft Mike is correct most have inserts to sell for this reason...
cut a piece of 1/8 or 1/4 plexyglass. sand od to a fine surface with 150 grit sand paper and slash the side with propane toarch[optional]. sand back side with 150 or 220 and paint black [or matching color]. super glue in place. the above suggestion from a marine may be cheaper but if you have the materials this looks ok
Reply With Quote