What should the RPM's be at WOT? Thanks
What should the RPM's be at WOT? Thanks
Between 5300RPM - 5500RPM
Specification page from 1989 Evinrude Sales Brochure
CLICK on the picture & go to FULL SIZE to increase size
ALWAYS Prop your E-Tec to it\'s OPTIMUM RPM - CHECK yours HERE >> http://www.bbcboards.net/zerothread?id=703860
`````````````````````````````````````````````````` `````````````````````````````````````````````````
DEDICATED to the Preservation of OUR EVINRUDE_JOHNSON_OMC_E-Tec HERITAGE
EVINRUDE CENTENARY YEAR: 1909 > 2009 \"100 years of FUN on the water\"
Thanks, just one more question do you know what the water pressure should read at WOT and idle?
4 - 5 lb psi (27 - 34 kpa) at idle
24 - 26 psi ( (165 - 179 kpa) at WOT
These are 2008 E-Tec figures.
ALWAYS Prop your E-Tec to it\'s OPTIMUM RPM - CHECK yours HERE >> http://www.bbcboards.net/zerothread?id=703860
`````````````````````````````````````````````````` `````````````````````````````````````````````````
DEDICATED to the Preservation of OUR EVINRUDE_JOHNSON_OMC_E-Tec HERITAGE
EVINRUDE CENTENARY YEAR: 1909 > 2009 \"100 years of FUN on the water\"
Reply With Quote