fluid beds

[mossboss]

has anyone made there own fluid bed for powercoating their jigs

[fordguy_85]

If you do a search, there are alot of guys who have built them... I know little to nothing 'bout them, so that's the best help I can give. Most of 'em have posted links to where they got their parts. Good luck

[21XDC]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by mossboss &raquo;</td></tr><tr><td class="quote">has anyone made there own fluid bed for powercoating their jigs</td></tr></table>

Works great&gt;&gt;&gt; http://www.bbcboards.net/zerothread?id=731767

[Pokie Pa]

Scott, I made 3 of them. Cheap to do and works great.
Check U Tube for fluid beds. There are a few different
ways to make them.

[mossboss]

thanks guys, will let you know how it comes out

[STRETCH1]

I made my own. Very simple...

I took a 4" PVC Pipe coupling. Put a cap on one end and drilled and tapped a hole in it to accept a standard air hose fitting. Screwed the works to a board.

Now I put a piece of construction paper in the mioddle of the coupling and screwed it together. Poured the power piant in it and turned on the air from my home compressor. The air blew right through the paper and created a nice fluid bed.