I just installed a flex hose cover to cover and protect my fuel oil and battery lines that provide life to my engine. i unpluged all the electrical then removed the fuel line and pluged it off then removed the oil line and pluged it off too. i put on my new hose flex and put all the fuel and oil and electrical lines back to their homes. i made sure that nothing was crimped or cut.

i primed my fuel line up and it primed up to a hard bulb then i primed up my oil bulb and it primed up hard too. i heard a click in the vro and saw no oil leaks.

i am a little nervous that i may have affected the oil pump with the little bit of air that may have entered the system but my bulb is hard.

is there anything that i may have missed or need to do further to my engine ?

thanks jeremy