i covered some lures with this stuff. how long does it take for this stuff to get hard? i know it was mixed right, but doesn't seem to be getting hard. i see in the box drying times, and they are long. i have some that have been this long. but they are not as hard as i would like. could the stuff be bad?
With e-tex I let mine set for 2 days.....
E-tex is very very touchy on the mix so if you got it right(50/50), there are a few other things like complete mixing(stir it for around 2 mins), temp.....don't think that's an issue right now unless your waaaaay North!One thing I always tell people when mixing most epoxys is stir them with wood, the solvent in most epoxys will could eat into what ever you mix with I use popsickle sticks don't think this is your problem.90% of the time with e-tex it will be incorrect mixing ratio or incomplete mixing. Let us know how it settles..
50/50 is crucial as well as mixing well with a wood stick. I use craft flat side and bottom sticks.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
well after setting for a couple days. they are hard. not as hard as epoxy. maybe some more time. thanks.
E-tex has a different feel about it than say devcon however after a couple of days if you can dent it with your fingernail something is wrong, you can recoat soft baits to harden them
Reply With Quote
.jpg)