Results 1 to 4 of 4
  1. #1
    Member Legend Chris's Avatar
    Join Date
    Jun 2004
    Location
    Copperas Cove, Texas
    Posts
    13,932

    Motor for lure drying?

    I had a motor setup for drying my lures butn in the 'move' to SanAntonio its lost. Can someone guide me in a direction to purchase another..tm
    2015 Legend V20
    250 ProXS
    Lowrance HDSLIVE 12s/16
    BBC Member since 2003

  2. Member
    Join Date
    Jan 2006
    Location
    Elizabethtown
    Posts
    3,491
    #2

    Re: Motor for lure drying? (Chris Brewton)

    Here's a few low rpm motors on ebay.
    http://shop.ebay.com/items/?_n...cat=0
    And several different speeds of motors here
    http://www.mudhole.com/Shop-Ou...motor

  3. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,398
    #3

    Re: Motor for lure drying? (Chris Brewton)

    http://www.surpluscenter.com/s...=GIAR


    I just used a universal rotisserie grill motor. Some guys use a motor from a microwave turn table, disco ball, can opener etc.. Make sure you get the right voltage or transformer to go with it.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  4. Member Legend Chris's Avatar
    Join Date
    Jun 2004
    Location
    Copperas Cove, Texas
    Posts
    13,932
    #4

    Re: Motor for lure drying? (dpage70)

    Thank you found what I was looking for..
    2015 Legend V20
    250 ProXS
    Lowrance HDSLIVE 12s/16
    BBC Member since 2003

Similar Threads

  1. Rod Drying Motor
    By Ryan in forum Rod Building & Tackle Making
    Replies: 2
    Last Post: 10-03-2010, 03:37 PM
  2. does anyone have a extra rod drying motor
    By PII Magnum in forum Rod Building & Tackle Making
    Replies: 6
    Last Post: 05-01-2010, 07:37 AM
  3. Lure Drying
    By mattmaddog in forum Rod Building & Tackle Making
    Replies: 4
    Last Post: 03-17-2009, 12:42 PM
  4. do I need a drying motor?
    By CShaver8 in forum Rod Building & Tackle Making
    Replies: 4
    Last Post: 12-03-2006, 09:38 AM
  5. finally got lure drying wheel completed pic
    By kbkindle in forum Rod Building & Tackle Making
    Replies: 6
    Last Post: 01-20-2006, 05:18 PM