Thread: New To Painting

Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2006
    Location
    huntsville
    Posts
    41

    New To Painting

    Guys got air brush equip for christmas messed around the other day then finished and cleaned my gun or so I thought. I use createx paint so I poured some water in gun shot all paint out reloaded water put reverse pressure on gun. I then put finger nail polish remover in the gun and sparayed it out and rinsed with water. I picked my guns up today to paint a little and relieve stress and notta clogged up. Was it the polish remover? This was going to be my fun hobby and it isnt starting off to well. Thanks for any help.

  2. Member
    Join Date
    Apr 2006
    Location
    alexandria
    Posts
    751
    #2

    Re: New To Painting (champn)

    has to be the polish i use the createx and just put about a quarter createx cleaner with the rest water and spray it out and its fine

  3. Member
    Join Date
    Apr 2005
    Location
    Cadiz,Ky
    Posts
    3,826
    #3

    Re: New To Painting (champn)

    keep a bottle of windex/water handy for cleaning,not sure about nail polish remover I wouldnt want to breathe it after the gun sprays it out and its a mist in the air ,everyday before I start painting I shoot some water just to be sure Im clear. Also createx is known for its clumps put a piece of panty hose over the mouth of the bottle and screw the lid back on this will help alot.

Similar Threads

  1. Been painting some lately.
    By zbass333 in forum Rod Building & Tackle Making
    Replies: 11
    Last Post: 11-24-2011, 03:17 PM
  2. painting
    By fishing02 in forum Rod Building & Tackle Making
    Replies: 3
    Last Post: 03-26-2011, 10:50 AM
  3. Been Painting Again
    By mesmerizejigs in forum Rod Building & Tackle Making
    Replies: 13
    Last Post: 01-10-2011, 11:30 AM
  4. New to painting.......My First Four...........
    By Mr205 in forum Rod Building & Tackle Making
    Replies: 11
    Last Post: 04-11-2010, 05:22 AM
  5. Painting?
    By saebass in forum Bassboat Restoration
    Replies: 2
    Last Post: 12-01-2009, 05:38 AM