I got some living rubber, in the frog hair type. It came in the big long thick strands of it. How do I separate the individual strands, because there has to be a way besides pulling them apart one by one.
I got some living rubber, in the frog hair type. It came in the big long thick strands of it. How do I separate the individual strands, because there has to be a way besides pulling them apart one by one.
You put the jig in a vice, pull the strip in half or thirds. Then grab the end of the strip, pull it real tight. Then take a pair of dull or used scissors and cut right close to your fingers. The rubber will shoot back to the bait one at a time. After a while you will be amazed how fast you can do this. If you go too fast at first, You will have a few strands stuck together. Pulling real tight is a big key.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
21DX nailed it. If you do have some strands stick together, take a comb that the strands will fit between and comb it out, it will make the skirt look alot better too.
Use 4 inch black electrical ties and your skirts will stay put on those jigs for years.
2018 Z19/200 Optimax 2 stroker 24x3 Fury Ultrex 112
Lowrance HDS 12/9 Lives with AT 2
Reply With Quote
.jpg)