Help!! Missing a guide on my BPS Bionic Blade..

[Mickstix]

Hi fellas, I was going over my tackle last night and noticed that Im missing a guide on my 04' BPS Bionic Blade rod.. It's the "trigger" style rod, 6'6" MH one piece rod, and it's missing the guide that's right before the "tip".. (guide #9 of 10 I suppose?) Looks like it just fell out of it's binding.. Im sure I could send it back to BPS, but the shipping costs would not be worth the return.. But I would like to replace the guide.. Do any of you know where I might find a replacement that will match? I believe they are the "Light Fuji Concept aluminum oxide" guides.. They are "gold" color.. Thanks for any help or ideas!!!

[Skeeter Jay]

I'd say check at your local tackle shops.

[RedneckfromRI]

Mick,

Either post a picture or send me a picture via email of the next guide down so I can identify the guide..............I dont stock the gold frame guides but I can definitey ID it and point you in the right direction to get a new one!!!

[Mickstix]

Thanks Russ! Here's a pic of the guides..

[RedneckfromRI]

Ok.................
One more thing.................if you take a magnifying glass can you see a number on the foot of the guide below the one is missing?

[Mickstix]

Russ, all I can find is an "F" stamped on it.. I measured it and the outside diameter is about 7.5mm and the inside diameter is about 4mm. If that helps at all? Thanks again for checking this out for me!