What Transducer is this?

[careybirdwell]

What transducer is this? I have looked it up and it comes back as a AI 3n1 and AI 2n1. What does the MYCelium stand for? Thanks

[Marc Marcantonio]

It probably says Medium, meaning medium CHIRP.

[Basshopper]

Those appear to be OEM Boat mfg numbers from Lowrance Nitro uses those alot the Could be as you said 3-1 or 2-1 depending on what Units the customer buys HDS or Elite FS HDS always get 3-1 and Elite FS get 2-1 and then a Shoot thru Hull Puck is installed with a Y cables for switchng on the FS. Plug it into Someones HDS on Channel 2 go to the Installation and it will tell you what transducer number it is. has to be a Carbon Live or Pro for that to happen.

[careybirdwell]

Those appear to be OEM Boat mfg numbers from Lowrance Nitro uses those alot the Could be as you said 3-1 or 2-1 depending on what Units the customer buys HDS or Elite FS HDS always get 3-1 and Elite FS get 2-1 and then a Shoot thru Hull Puck is installed with a Y cables for switchng on the FS. Plug it into Someones HDS on Channel 2 go to the Installation and it will tell you what transducer number it is. has to be a Carbon Live or Pro for that to happen.

When I plug it into my HDS Live , it shows up as Unknown . Thanks

[tj]

Post #5 has similar transducer.
https://www.nitroowners.com/threads/...ecifics.85336/

[Basshopper]

When I plug it into my HDS Live , it shows up as Unknown . Thanks

Did you plug it into Channel 2 and is Channel 2 turned on in the live???

[Team Colibri]

I think you are looking at an AI 2i1 there. Connect to channel 2 (not channel 1) and it will provide side- and downscan if I`m correct. You will need another transducer for 2D.