Cannot really get a lot of info about this product. Not sure if it would hold a 20ft fiberglass boat. Anyone.
Sells for around $999
Cannot really get a lot of info about this product. Not sure if it would hold a 20ft fiberglass boat. Anyone.
Sells for around $999
2002 Pro Craft 200 Super Pro- 2005 200 Mercury Optimax, Retired
Empty Nester- Proud Grandfather 5-30-2014-Boy-Aiden, 8-2-2017-Boy-Calen
You check the Lewmar website? Has info there...https://www.lippert.com/boating-wate.../shallow-water
2008 Ranger 178VX
150 Yamaha V-max
It isn't really meant for the big fiberglass boats, mostly meant for aluminum boats that don't have room for pumps to run a hydraulic ram (instead of lewmar's electric ram). You will still need to purchase mounting brackets as well to mount them to your boat. Raptors are the next cheapest option for shallow water anchors and are a much better build and will hold better than the lewmar's.
What about a smaller 18’ fiberglass bass boat? While my boat is technically within specs, there are also real-world experiences to factor in.
Last edited by jjue1979; 05-15-2025 at 10:27 AM.
Anyone have a link to the new one that was going to overtake the market a few years ago? It ran off a simple water pump using the lake water. Any info?
I have a 20ft Vexus AVX with the Lewmar Axis Shallow water anchor system, and it works great for this boat. I have mine mounted on the jack plate, and yes, I needed to get mounts for them. The powerpole mounts work with this system. This system is good for boats 22' and up to 4500lbs.
1985 Skeeter SF-175 & 1985 Evinrude 150 XP (with VRO removed)
2x Humminbird 1199 with Humminbird 360 and Side Imaging & Garmin Echomap UHD 93sv with LVS32
Minn Kota Ultrex 80 45" DCS Advanced GPS
Millennium Spyderlok Crappie Rod holders (this boat is primarily used for crappie fishing)