AT 2 bottom always inclining

[Mlatham1]

Had AT 2 for a while. Did the update, everything working excellent. Well until today, now my bottom isn’t that crisp and is inclining left to right. If I’m in 5 feet on a flat bottom the screen will show it at 1 foot by 70 feet out. Plus the bottom is fuzzy at distant not crisp lie the first 20 or so feet out. Any idea? Power is at 13 volts

[Basshopper]

Turn the stableview to the opposite its set at.

[Mlatham1]

I’ve already tried that unfortunately. Deeper 15 or so seems better but shallow still inclines. Have tried adjusting transducer but that sends it declining

[rudapa]

I've only had this problem with stableview on

[mikeky]

Had AT 2 for a while. Did the update, everything working excellent. Well until today, now my bottom isn’t that crisp and is inclining left to right. If I’m in 5 feet on a flat bottom the screen will show it at 1 foot by 70 feet out. Plus the bottom is fuzzy at distant not crisp lie the first 20 or so feet out. Any idea? Power is at 13 volts

Any changes in your setup or transducer mounting?

[Basshopper]

In approx 20ft of water what is the Forwared range in feet you can still see the bottom with good detail? Such as trees or actual bottom?