pls i have speed boat low profile writen on it maxmum HP 150 put 175gt motor on it ....in the start up the nose gose up to much so i have to let some one sit in the front or put some wight ....is that ok or any more advice...
pls i have speed boat low profile writen on it maxmum HP 150 put 175gt motor on it ....in the start up the nose gose up to much so i have to let some one sit in the front or put some wight ....is that ok or any more advice...
I do not see how any of our experts here could help with that kind of incoherence..
Dude, lets start slow.
1st---What kind of boat do you have?
2nd--Which motor? Model and serial numbers are important here
3rd--Whats the problem you are having with each, be specific.
4th--If you are a Troll......................................Nevermi nd
5th--If not, then I apologize.
WT \"Bon Temp Roulez\"
He has some minor issues with the English language but so far I can understand him.
Mazin you need to make sure your motor is trimmed all the way in (down) before you apply maximum power. As the bow breaks over you can then apply upwards trim.
dear between friends there is no apologize ....
i have picture of the boat with motor on it but i how i can send it...?i try but this come out [IMG][/IMG]
1st...boat is champion but i cant say what kind it is but its low profile 6 person it takes...if u want i can send u body number.
2st...Johnson 175GT MOD JI755TLCEB - SRE NO R08264139
3st...when i start with full acceleration the boat nose goes up so hi so i must but some wight in the front of the boat to make a balance...my question is if the maximum HP that i should put on the boat is 150HP as written on the boat, but i put 175GT Johnson on it is there any problem or dangers with 25HP more...i love speed that's y i did it..
4st...what do u think now ...am troll or u need more info...
thanx and sory for my inconvenience...
No you aren't getting my explanation. When you are stopped or at idle speed use the motor's electric trim and trim the motor fully down. If you have a trim gauge watch the down needle.
Now when you accelerate the bow may go up some but not sky high. Gradually trim the motor up once you are on plane. Look at gauge bow up.
To post a picture you need to have it on a web hosting site like Shutterfly then right click on the picture, click on properties and then right click and do a copy. Then come back here and click on [IMG][/IMG] and insert the properties in between the [IMG][/IMG]
No the 175 weights only 25 pounds more but you can get into legal trouble if you exceed the rating plate on the boat.
You can also send us the boat Hull ID number plate and that will help.
Ok Mazin. My bad, was just a little leery there for a bit. Kind of figured out you were from "Out of Town"
You're fine , I guess. Just pay attention to ChampioNman and he will get you boating very soon.
WT \"Bon Temp Roulez\"
pls what u mean by boat hull ID ...is that the long digits print on rear of the boat body....?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mazin »</TD></TR><TR><TD CLASS="quote">pls what u mean by boat hull ID ...is that the long digits print on rear of the boat body....?
Yes. Should be on the lip of the transom on drivers side on the back of the hull. Wow, a Champ made it Iraq?? Have we gone Global??
WT \"Bon Temp Roulez\"
yas champ made it ...i buy it from one of Saddam guards in 1998 but originally i think its from Kuwait....
the number of the hull is# LTC90339G889
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mazin »</TD></TR><TR><TD CLASS="quote">yas champ made it ...i buy it from one of Saddam guards in 1998 but originally i think its from Kuwait....
the number of the hull is# LTC90339G889</TD></TR></TABLE>
Hey Fred!! Can you check this hull # or can Lea?? I'll take it to the Champ forum.
WT \"Bon Temp Roulez\"
That is not a Champion. At least from Mt. Home Arkansas if it was the letters would be TSB. LTC90339G889 This hull was made by Litchfield Custom Boats they went out of business in December of 1988 and they were based out of California. So although the boat may say Champion on it, it is really a West Coast speed boat. From a custom builder but not Champion boats.
Mazin sent me photos, which I also forwarded to Fred. As Fred just said, the boat is not a Champion. It is a Campione'. It's a bowrider/runabout.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lea »</TD></TR><TR><TD CLASS="quote">Mazin sent me photos, which I also forwarded to Fred. As Fred just said, the boat is not a Champion. It is a Campione'. It's a bowrider/runabout. </TD></TR></TABLE>
Made by Ebbtide boats in White Bluff Tennessee USA.
what ever...
is there any answer ....?
1 week pass until now and no specific answer from the experts of the BBC ....
i got only the water pump number #0395060 right ....
so pls any hope to get an answer if not then i have to say thanx to experts for there time if yes then am waiting...
wish u all the best ....
And you got that wrong also. The water pump kit is part number 5001594. Impeller only is 5001593.
We have tried countless times to communicate to you that the boat was built by Ebbtide boats from White Bluff Tennessee USA it is a Campione' model ski boat.
We have told you that you need to change the prop to a stainless steel propeller of a 23 4 blade or 24" 3 blade.
I have told you that when you start off from idle speed and start to speed up you need to trim your motor down fully and they increase the positive trim.
I have told you that I will not give you any information to jerry rig your motor. If you want it to operate properly you need to add original equipment parts.
If this isn't clear to you please contact your local Bombardier Outboard supplier in Iraq and maybe they can translate this information to you.
Re: part number... (mazin) » 12:45 PM 5/1/2009 Reply Edit
--------------------------------------------------------------------------------
0395060 is the new part #, 5001594 is the old part number. Parts are the same on Johnson and Evinrude.
Dan Burnette - Marietta, GA
Triton TR20 - 200 Rude
now what is the thing that i got wrong...! is your friend water pump kit number wrong do i have to be confused...
with all my respect...to all the Friends
should i work on what i see or should i depend on bass boat central write...?
pls discuss between your friends and give me the Right part no...
did any body wounder y all this discrepancy in answers ...!
thanx ...champ
"0395060 is the new part #, 5001594 is the old part number". My mistake, I have the information reversed 5001594 is the new part #. ChanpionMan's point being that if you order part # 395060 you will receive part # 5001594 sorry for the bad information.
Dan Burnette - Marietta, GA
Triton 18TRX - 200 HO G2
Reply With Quote
