Ultrex replacement prop?

[nitro26]

Running an ultrex 112 , does anyone know what is the right kit to buy the replacement prop kit so I can keep an extra on my boat ?

[dabassking]

I’m pretty sure it’s the biggest one they sell. Should be easy to look up.

[Murph McB]

Mk-38 comes to mind

[BassBoatElectronics.com]

MKP-38. Fun fact, the MKP-33 is the same prop with a smaller bezel. If you are out of town and can't find the right prop for either the 80 or 112, you can buy the other and swap bezels.

[duracraftman]

I had been running a Kipawa for a while and switched back to the MKP-38 to see if the Kipawa made any difference and I ended up switching back to the Kipawa again. Surprisingly the Kipawa is cheaper than the Minn Kota stock prop now too.

Only down-side is the inability to use a prop nut that you can remove without a wrench like the TH Eliminator.

[jerzia]

I had been running a Kipawa for a while and switched back to the MKP-38 to see if the Kipawa made any difference and I ended up switching back to the Kipawa again. Surprisingly the Kipawa is cheaper than the Minn Kota stock prop now too.

Only down-side is the inability to use a prop nut that you can remove without a wrench like the TH Eliminator.

I use the same nut and washer for the Kipawa and the Minn Kota prop, the only difference being a deeper socket for the Kipawa.

[nitro26]

Thx for the info guys

[duracraftman]

I use the same nut and washer for the Kipawa and the Minn Kota prop, the only difference being a deeper socket for the Kipawa.

Right, you can use the same nut and washer. I was referencing this style prop nut:
nut.png