Results 1 to 5 of 5
  1. 05-09-2024, 07:33 PM #1
    davethebuilder
    davethebuilder is offline
    Member
    Join Date
    Feb 2014
    Location
    Scottsburg indiana
    Posts
    461

    Power pole hydraulic lines

    I should be receiving my new power pole blades in a few days. Just curious where every ones hydraulic lines are drilled through.
    Dave
    2023 Ranger Z518/ Mercury 200 Pro XS
    ​
    Reply With Quote Reply With Quote
  2. oklaranger
    oklaranger is offline
    Member
    Join Date
    Apr 2012
    Location
    oklahoma city
    Posts
    309
    #2 05-09-2024, 10:16 PM
    K and K and Hydrilla gear have some nice stainless bulkheads.
    Reply With Quote Reply With Quote
  3. Braxtonta
    Braxtonta is offline
    Member
    Join Date
    Jun 2022
    Location
    Red Oak, North Carolina
    Posts
    40
    #3 05-10-2024, 08:47 AM
    I recently installed poles (bought from K & K Kustomz) on my 2022 Z519 and used their bulk heads which made a nice finished installation. Also, both pumps fit nicely under the splash well cover. Here are a few photos as I had a difficult time finding some ahead of my DIY project.
    IMG_1678.JPGIMG_1679.JPGIMG_1680.JPG
    2022 Ranger Z519, 2022 Mercury ProXS 225 4-Stroke (SN#3B056732), Fury 4-24P or Fury 4-23, Smart Craft Gauges, Atlas Plate, Ghost TM, Lowrance Electronics, BBT mounts, Power Pole Blades, Ionics.
    Reply With Quote Reply With Quote
  4. KandKKustomz
    KandKKustomz is offline
    BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    11,357
    #4 05-10-2024, 07:23 PM
    Quote Originally Posted by Braxtonta View Post
    I recently installed poles (bought from K & K Kustomz) on my 2022 Z519 and used their bulk heads which made a nice finished installation. Also, both pumps fit nicely under the splash well cover. Here are a few photos as I had a difficult time finding some ahead of my DIY project.
    IMG_1678.JPGIMG_1679.JPGIMG_1680.JPG


    Reply With Quote Reply With Quote
  5. davethebuilder
    davethebuilder is offline
    Member
    Join Date
    Feb 2014
    Location
    Scottsburg indiana
    Posts
    461
    #5 05-15-2024, 09:25 PM
    I got my poles on and my lines drilled thru, was a pretty easy deal t20240515_210206.jpgook a couple hours, I could do it again in have the time
    Dave
    2023 Ranger Z518/ Mercury 200 Pro XS
    ​
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »