1998 Ficht Fuel Lift Pump Repair

[clayshooter]

1998 FICHT
J175FTLECS
Ser# G04504029
I recently purchased the lift pump repair kit p/n 0439881.
And there was only 1 of the little plastic valves in the box,the box the valve was in has no p/n on it.
I was wondering should there have been 2 valves in the box?
My local dealer had no way to come up with the answer of how to get another valve,short of ordering another kit at $40.00.
Does anyone know how to get an extra valve,or do you have the kit with both valves in it?
I would be willing to buy another kit,but I want both valves this time.
I went ahead and replaced the weekest one of the 2 valves and re-assembled the pump,and replaced it on the motor,but would like to have another kit to have incase this don't work out.
I'm taking the boat on a trip to Lake Russell Georgia in early April,and would like to have it before I leave.
Thanks for your time!

Ed

[wise 1]

Clayshooter.




Yes there should be two of the valves in the kit. I too just rebuilt my lift pump,and puchased the kit from Carol @ C and O. The kit should contain two gaskets, diaphram, one heavy spring, one light spring, two spring caps, and two valves with pin

Hope that helps,
Wise 1

[clayshooter]

Thanks wise 1.
I thought it was odd that only 1 valve in the box.
I'll try to reorder the kit then.

Ed