Ionic 24v Not Showing 100%

[WranglerSS]

Put it on the charger today at 68%. Charged till light went green. Shows 52ah which is normal but still showing 68%. Is there a way to manually set it back to 100%

[DREWTICK]

have you checked the voltage with a meter? also what voltage does the app show?

[WranglerSS]

have you checked the voltage with a meter? also what voltage does the app show?

Voltage on a meter is 26.3. The app isn't showing anything, all fields are blank. I do get state of charge in the preview but now when I click on the battery all lines are empty including history.

[CatFan]

Voltage on a meter is 26.3. The app isn't showing anything, all fields are blank. I do get state of charge in the preview but now when I click on the battery all lines are empty including history.

Sounds to me like a connection issue between app and battery and the app is just showing the last reading.

[WranglerSS]

It was operator error. I disconnected the battery and removed the trolling motor to get the gel coat fixed and forgot to reattach the hot lead for the charger. Apparently the charger will go green shortly after plugging it in even though both leads aren't connected.

[cmbtvet]

It was operator error. I disconnected the battery and removed the trolling motor to get the gel coat fixed and forgot to reattach the hot lead for the charger. Apparently the charger will go green shortly after plugging it in even though both leads aren't connected.

I was going to suggest maybe updating the app but it looks like you figured it out.

[bobcoy]

Good job wrangler! We all do that kind of…….stuff. Many will just go away, but glad you let us know. Might inspire someone to check the simple stuff after they find it in a search. Bob