What thurst washer do I need for Trophy Prop?

[BornYoung]

I have a 2000 year 175hp Evinrude model #E175FPLSSV #G04728212.
Currently running a 24 pitch Raker and wanted to try a 25 Trophy on it, I know I'll have to rehub it with heard I'll need different thrust washer too?

[lkhartwl]

when you buy the prop just get the Merc kit that is for a rude it comes with the hub , washer, nut and such cost about 45 dollars

[BornYoung]

Thanks, I'll have to get a pt# when I get the prop and call a Merc Dealer.

[Lockjaw]

Is it a flo torq prop? If so, supposedly the Michigan wheel kit is better the the merc kit.

I have a tempest on mine. I have a washer on the back I ground down to work with a chopper, and I use it and then a regular size one on the back. A regular one won't fit down in the metal insert.

If it is not a flo torq, then you need to drill the splines out to fit, and then use a gade thrust washer. You will probably still need to cut down the washer on the back.

[Kenneth ALBassr]

I use the Michigan Wheel kit and prefer it over the Mercury kit.

Kenneth