WHERE TO BUY???

[olericketty]

looking for omc brand fuel hose and primer bulb assembly for my 96 200 vindi keep losing prime almost everytime i stop and fish for a hour i have to reprime my fuel line to take off also thinking about changing plugs i have ngk in their now is that ok or should i go back to champs this is a fresh powerhead with slight mods and boysen reeds thanks for any help???

[ChampioNman]

I'd think my local BRP dealer might have some. When you install the new stuff put the bulb as vertical as possible to the motor. Also if you have anti-syphon valves on your fuel tank/tanks remove them and install straight barbs, 3/8" ID. Yep loose the NGK's and install Champ QL78YC's gapped at .030 tight. You can get them at AutoZone/O'Reilly's and save some$$. The Champ stock # is 928, saves the counter monkeys from looking at you like you have 3 heads .

[olericketty]

how would i know if i have antisiphon valves or not my boat is a 96 295pro xl stratos what do they look like. as far as the bulb being mounted the way you said can you elaborate i hope i spelled that correctly??can i order a hose assembly from you or call a dealer or what i also have a fuel/water seperator on my fuel sysytem thanks for the reply ill wait for your answer >>>

[ChampioNman]

Looks like you have 3 dealers in your area and 2 are E-tec certified. Crews N II OB,
Andrew Albritton Marine service and Becks OB the last 2 are E-tec certified, not that it matters in this case. Run the new fuel line (you can buy it in bulk) and run it from your water separator across the splash well and then curve up about 3 inches. cut the hose and install the new bulb. Then run the remaining hose into the motor and hook it up to the fuel filter. Use ratchet clamps on all connections. While you are there get a new separator filter and fuel filter.
As far as your AS valves on that 295 I can't remember if it has a single or dual tank but you would have to take out the seats and then the back panel. Try the new hose and bulb first. .