Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Nov 2007
    Location
    saint louis/charles MO
    Posts
    5,635

    Who in the STL can wrap a Guide?

    I need someone that can wrap a Rod guide in the STL saint charles area..
    Any recommendations?


    lewisboat.com
    Omega Custom Tackle
    Lewis Pro Team
    2021 Phoenix 920 Elite

  2. ozarkCat
    Join Date
    Jan 2012
    Location
    Old Monroe
    Posts
    246
    #2

    Re: Who in the STL can wrap a Guide? (Nitroman77)

    Bullseye bait and tackle in Offalon Mo. It is on the south service road. he is reasonble and does a great job

  3. Life's tough get a helmet JDH_STL's Avatar
    Join Date
    Mar 2007
    Location
    St Louis MO
    Posts
    5,537
    #3

    Re: Who in the STL can wrap a Guide? (ozarknitro)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by ozarknitro &raquo;</td></tr><tr><td class="quote">Bullseye bait and tackle in Offalon Mo. It is on the south service road. he is reasonble and does a great job</td></tr></table>

    I'll second that.
    He also has a nice selection of vision 110's

    Peace is that brief glorious moment in history when everybody stands around reloading.
    Thomas Jefferson

  4. Member
    Join Date
    Nov 2007
    Location
    saint louis/charles MO
    Posts
    5,635
    #4

    Re: Who in the STL can wrap a Guide? (ozarknitro)

    Yea I thought so..
    How long does he take you know and cost?


    lewisboat.com
    Omega Custom Tackle
    Lewis Pro Team
    2021 Phoenix 920 Elite

  5. Life's tough get a helmet JDH_STL's Avatar
    Join Date
    Mar 2007
    Location
    St Louis MO
    Posts
    5,537
    #5

    Re: Who in the STL can wrap a Guide? (Nitroman77)

    I had him put a guide on an IMX rod last year and don't remember the cost but it wasn't too bad. He had it maybe a week so I figure I got it back a lot quicker than if I had sent it back to Loomis. Give them a call and see if they can help you out.

    Peace is that brief glorious moment in history when everybody stands around reloading.
    Thomas Jefferson

  6. Member
    Join Date
    Oct 2008
    Location
    O'Fallon
    Posts
    414
    #6

    Re: Who in the STL can wrap a Guide? (Nitroman77)

    Bullseye does a great job... The last rod he had for about 3 days and it looked perfect.
    Joe Dietz
    "5 in the Live"

  7. Banned
    Join Date
    Dec 2007
    Location
    St. Joseph, MO
    Posts
    9,057
    #7

    Re: Who in the STL can wrap a Guide? (Dietz_joe)

    Bullseye is the place- great little bass fishing shop! John and Larry are great guys who usually can help you figure out what you need -even if you didn't realize you need it

    That is a good little skill to learn, Trey-as is rod-building in general. I took a course taught by Tom Hargrove and built a couple fly-rods. Guide replacement isn't difficult to do-just need a replacement guide, thread, and epoxy-and perhaps a dremel tool to smooth/file the feet of the guide down nice and sharp. You can rotate the rod by hand while the epoxy dries to prevent sagging epoxy drying.

  8. Member
    Join Date
    Nov 2007
    Location
    saint louis/charles MO
    Posts
    5,635
    #8

    Re: Who in the STL can wrap a Guide? (BassTaurus)

    That's kinda what I was thinking as I've got fly tying gear( thread) and vice, dremel and epoxy from painting baits.


    lewisboat.com
    Omega Custom Tackle
    Lewis Pro Team
    2021 Phoenix 920 Elite

  9. Member
    Join Date
    Nov 2007
    Location
    saint louis/charles MO
    Posts
    5,635
    #9

    Re: Who in the STL can wrap a Guide? (Nitroman77)

    Bullseye charges 10$ if you don't have a guide and 7$ if you do..
    Should be done weds I hope..


    lewisboat.com
    Omega Custom Tackle
    Lewis Pro Team
    2021 Phoenix 920 Elite

  10. Member
    Join Date
    Nov 2007
    Location
    saint louis/charles MO
    Posts
    5,635
    #10

    Re: Who in the STL can wrap a Guide? (Nitroman77)

    Got the rod back and EH they did an ok job as there was bubbling in the epoxy and guide seems slightly off..
    I also asked them what their turn around time for reel cleaning was and he Told me 3 weeks right now and come FEB-MARCH its 6 WEEKS! LOL I about fell on the floor and cant imagine giving my customers that kind of turn around..




    lewisboat.com
    Omega Custom Tackle
    Lewis Pro Team
    2021 Phoenix 920 Elite

  11. Banned
    Join Date
    Dec 2007
    Location
    St. Joseph, MO
    Posts
    9,057
    #11

    Re: Who in the STL can wrap a Guide? (Nitroman77)

    I always blow on my epoxy after it is mixed on the foil- it de-gasses it so the bubbles come to the top and pop there and don't form on the rod. I always thought the TAT on reel maintenance was pretty long, but I can't judge, since I don't know how many he gets. John always seems to be working in the back on reels and rods when I go in there. I've since learned to do my own reel work.

Similar Threads

  1. Guide wrap suggestions
    By hsb in forum Rod Building & Tackle Making
    Replies: 8
    Last Post: 12-24-2010, 12:41 PM
  2. rod wrap
    By DB13 in forum Clever Tips & Ideas
    Replies: 0
    Last Post: 01-25-2010, 06:10 PM
  3. Crankin' Stick: Spiral Wrap? Guide Size?
    By Jake Grey in forum Rod Building & Tackle Making
    Replies: 10
    Last Post: 01-23-2010, 06:56 AM
  4. My new Wrap
    By JeffinParadise in forum Blazer Boats
    Replies: 8
    Last Post: 10-31-2009, 02:03 PM
  5. Replies: 17
    Last Post: 03-09-2006, 04:41 AM