Does anyone know what the part number for this is? I saw a kit that came with a plastic block and wrench.
Thanks
Does anyone know what the part number for this is? I saw a kit that came with a plastic block and wrench.
Thanks
If you would, please take a moment to review the Forum Announcements and be sure to provide the Required Info (serial number) when posting. Thanks!
I would not recommend a "plastic" wrench for this purpose. Buy a 1-1/16" deep socket and a breaker-bar or ratchet (better yet, a Torque Wrench). Most of the hub kits used for this engine will torque to 55 lbs/ft (minimum) torque.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Thanks
^^^Originally Posted by EuropeanAM
If you would, please take a moment to review the Forum Announcements and be sure to provide the Required Info (serial number) when posting. Thanks!
I would not recommend a "plastic" wrench for this purpose. Buy a 1-1/16" deep socket and a breaker-bar or ratchet (better yet, a Torque Wrench). Most of the hub kits used for this engine will torque to 55 lbs/ft (minimum) torque.^^^
what he said. I carry a digital torque gauge that goes on the end of a brake over bar.. I checked it against a good torque wrench and it was spot on.
Reply With Quote
