Results 1 to 3 of 3
  1. 06-01-2008, 12:46 PM #1
    pcmc19057
    pcmc19057 is offline
    Member pcmc19057's Avatar
    Join Date
    Oct 2007
    Location
    levittown, pa 19057
    Posts
    641

    1999 200 ficht gear ratio & water pressure specs.

    Hi everyone ,
    Just setting up my Champ 203 and need this info .
    Also running 24p raker
    I hope someone can help .
    Thanks
    Paul
    Reply With Quote Reply With Quote
  2. Bassmeister
    Bassmeister is offline
    Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,068
    #2 06-01-2008, 02:16 PM

    Re: 1999 200 ficht gear ratio & water pressure specs. (pcmc19057)

    1.86-1 Ratio, Keep it 18lbs or higher @ wot. RPMs no higher than 57-5800
    Reply With Quote Reply With Quote
  3. ChampioNman
    ChampioNman is offline
    SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,128
    #3 06-01-2008, 05:41 PM

    Re: 1999 200 ficht gear ratio & water pressure specs. (Bassmeister)

    Depends on the plate but about 3.5 below the pad works best maybe 3.25.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 200hp xp water pressure specs??????? anyone
    By tommyboy201 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 03-27-2012, 03:33 PM
  2. Water Pressure - 1999 Evinrude Ficht 200hp
    By FerstlerSlim in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 06-23-2011, 07:15 PM
  3. what is gear ratio on a 1999 200 vmax o66??? is it 1.87?
    By rcwhite in forum Yamaha Motors
    Replies: 2
    Last Post: 02-21-2007, 07:55 PM
  4. Gear ratio of 2003 225 Ficht?
    By Oldgeezer in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 09-02-2006, 03:52 AM
  5. 1999 90hp Johnson Gear ratio
    By Rmart30 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 06-19-2005, 06:37 PM