Results 1 to 6 of 6
  1. #1

    200 H.O Question

    My 2006 200 H.O has dropped No1 cylinder at 60.8 hours and they are fitting a dressed 2008 powerhead . The dealers are telling me that the 2008 powerhead is stronger than the 2006 is this true and what is the difference between the two. Any info would be greatly appreciated.

    Damien



  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,218
    #2

    Re: 200 H.O Question (bassfanatic5)

    As in anything, technology continues to improve product even in outboards.

  3. Member
    Join Date
    May 2004
    Location
    Harmony
    Posts
    9,304
    #3

    Re: 200 H.O Question (ChampioNman)

    The 08 will feature an improved oiling system with 6 additional lubrication points, different injectors, and some other small tweaks. My 08 225HO powerhead is quite a bit stronger than my 06 was.




  4. #4

    Re: 200 H.O Question (AB)

    Thanks Guy's



  5. Member LIQUID NIRVANA's Avatar
    Join Date
    Aug 2006
    Location
    New South Wales, Australia
    Posts
    659
    #5

    Re: 200 H.O Question (AB)

    You will be a very HAPPY man. Please post the results.

    ================================================== ======


    ALWAYS Prop your E-Tec to it\'s OPTIMUM RPM - CHECK yours HERE >> http://www.bbcboards.net/zerothread?id=703860
    `````````````````````````````````````````````````` `````````````````````````````````````````````````
    DEDICATED to the Preservation of OUR EVINRUDE_JOHNSON_OMC_E-Tec HERITAGE

    EVINRUDE CENTENARY YEAR: 1909 > 2009 \"100 years of FUN on the water\"

  6. #6

    Re: 200 H.O Question (LIQUID NIRVANA)

    Thanks Liquid,
    I was really happy with the old engine and will be keen to see how it goes when i get it back.
    Damien



Similar Threads

  1. Lazy Sunday question, PTO system question.
    By Bitman in forum Stratos/Javelin Boats
    Replies: 1
    Last Post: 10-05-2008, 09:39 AM
  2. Oil/Fuel Leak Question - Water Pressure Gauge Question - HELP Please
    By trophy01 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 05-28-2008, 09:36 AM
  3. Age Old Question, 200HP E-TEC, Oil Question....Again
    By Sambone in forum Evinrude/Johnson Motors
    Replies: 98
    Last Post: 03-11-2008, 06:11 PM
  4. prop question & rpm question
    By pete 1 in forum Yamaha Motors
    Replies: 4
    Last Post: 02-12-2007, 01:17 AM