Thread: power pack

Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    May 2008
    Location
    Marrero
    Posts
    1

    power pack

    I had my boat for 5 years then my power pack when out. After that ones a year I have to replace my power pack. . Would anbody know what wrong? It's a 115 Johnson (model # j115PLSSB - Ser.# G 04829089).

  2. Member
    Join Date
    Sep 2004
    Location
    andover
    Posts
    391
    #2

    Re: power pack (AKB)

    The best advice i've seen on here to eliminate other possible causes are, Use Stainless Lock Nuts on battery connections(NO WING NUTS), make sure there is a star washer under pack ground wire, DO NOT USE NGK Plugs, and it is recommended that you replace the EET Sensor when you replace the pack.

Similar Threads

  1. Bad power pack????
    By rtbsball11 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 12-29-2011, 07:36 AM
  2. Power Pack...OMC vs CDI??
    By taterhog3232 in forum Evinrude/Johnson Motors
    Replies: 9
    Last Post: 06-02-2011, 08:26 AM
  3. Power Pack
    By Toddsprint in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 02-26-2009, 05:27 AM
  4. Power pack
    By jrc27 in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 10-22-2007, 09:13 PM
  5. power pack
    By lkhartwl in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 08-06-2005, 09:16 AM