Results 1 to 3 of 3
  1. 06-28-2019, 09:22 AM #1
    McGinnis_Fishing16
    McGinnis_Fishing16 is offline
    Member
    Join Date
    Sep 2017
    Posts
    210

    2012 Etec 175 Not getting WOT

    Hey guys I have a 2012 etec 175 it was a re-power and after running it a few times I noticed it was time to change the shifter as it was from 97 and getting old and I cracked the plastic red lever on it. I changed the shifter to a new BRP concealed mount but it seems I'm not getting WOT now. When I take the air box off the butterflies are not opening 90 degrees. Is this possible if I only changed the shifter and didn't touch anything at the motor?
    Reply With Quote Reply With Quote
  2. ChampioNman
    ChampioNman is offline
    SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,111
    #2 06-28-2019, 01:01 PM
    You should always check the throw on the cables when anything in the control path has been changed. Just a simple cable adjustment at the motor.
    Reply With Quote Reply With Quote
  3. McGinnis_Fishing16
    McGinnis_Fishing16 is offline
    Member
    Join Date
    Sep 2017
    Posts
    210
    #3 07-03-2019, 09:21 AM
    Quote Originally Posted by ChampioNman View Post
    You should always check the throw on the cables when anything in the control path has been changed. Just a simple cable adjustment at the motor.
    Thanks Champ! What is the process for adjusting the cables?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »