Gas tank

[spider1]

I replaced my gas tank sending unit out and it is working so much better now!!
For only $45.50 plus shipping it is hard to beat!!! And they are running a 30% off sale!

Model SSS/SSL

http://www.wemausa.com/tank_se...s.htm

[1outlaw]

Oh Blair!!!!!

[blair]

THANK YOU CONNOR !!! I am sooo all over this..................

[STROKEDYAMAHA]

i gues I am one of the luck ones I havent had a problem with any of my sending units and have alwasy been acuurate maybe I havent had a boat long enough to have a problem

[Largemouthlou]

You are lucky Paul cause I have used 2 guages and 2 different float sending units and they havn't worked real well!!

[21XDC]

I replaced mine with one of these fully adjustable with no moving parts type. They will cut it for you if you give them the tank dimensions. http://www.centroidproducts.com/tableofc.htm

[Largemouthlou]

Mike did not see any priceing, Do you remember how much it cost??

[21XDC]

I wanna say $60. But don't hold me to it. I like that it don't make my gauge bounce around at all. I can adjust my empty so I have some gas in as a reserve or on fumes. I chose to have reserve. You also can adjust the full mark. They were real nice people when I delt with them.

Heres another one, probably the same thing.

http://www.e-performancemarine...d=196




I needed this one below for my Yamaha digital gauges.

http://www.centroidproducts.com/yama-cal.pdf

[spider1]

Mike that is probably a better sender but I tried to call them for a week and a half with no answer. So I gave up. The bad thing is there are just up the road from me.
The one I have does not bounce and it is fully adjustable because I have it hooked up to the NMEA 2000 network and can chose three different adjustments. 2 point, 3 point or 5 point. IF you do not have it hooked to the 2000 network then there is no adjustment.

[21XDC]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spider1 &raquo;</TD></TR><TR><TD CLASS="quote"> there are just up the road from me.
.</TD></TR></TABLE>

Then why are you calling for a week and a half?

[spider1]

Because I have to work during there business hours!

[Fred M]

Spider , what is the correct length to order

[spider1]

I measured the tank at 15 inches and they recommend that you order one inch shorter. Not really sure why. But after all that you want the 14 inches.

[Fred M]

Thanks Bro