95 201Pro XL 200 Vindicator Performance

[luvsomebass]

I bought a 95 stratos 201Pro Xl w/200 Vindicator a couple weeks ago. Vey nice boat...Has a 24 Raker - 6" Hydraulic Jack Plate - compression 100-104 psi on all six. WOT 5400 rpm @ 52 MPH GPS. Started out at 2 1/2 below on jack plate. Moved up and down 1/4" increments with no better results. Hard to start at times like it's flooding out. Have to let it set 5 minutes with motor trim all the way up then will crank with trimed up. Also when I put in gear it will shut off unless I give it some gas Immediately when I put in gear. It takes a while to plane out when I take off.

[TightLip]

Your WOT should be around 5800 - 5900 rpm. Have someone do a link sync and also make sure when your throttle is opening all the way. Then do a decarb and tune-up

[GregInAtl]

My buddy has the same set up, I believe even same year and it does 60 on GPS and isn't running well he doesnt think. I'll ask pad to prop shaft and see if he even knows.

[VOL-FISHER]

I had all exact same issues with a 96 200 Johnson. Ended up being a timer base and stator going bad. Hopefully that is not your problem as it was almost 1K to fix.

[luvsomebass]

What is a link sync?

[TightLip]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by luvsomebass &raquo;</td></tr><tr><td class="quote">What is a link sync?</td></tr></table>

It is making sure that all of your carbs open equally and fully. BTW your prop to pad will need to be about 3.25 - 3.5 below

[ChampioNman]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by luvsomebass &raquo;</td></tr><tr><td class="quote">What is a link sync?</td></tr></table>

Could ask the guys on the John/Rude forums. but something is a miss.