Made plier holders for the 201.

[201pro]

I used a couple 3/4" wire grommets and drilled 2 holes in the flat part of the console. Works perfect and there is nothing under that area that will be effected by a little water when it rains. Handy to get to, yet out if the way. You need grommets that have a fairly deep middle portion as the console is over 1/4" thick. I got the idea from a buddies ChampioN. His has a black vinyl tool holder mounted there, but the rubber grommets work just as good and cost less than $2.00 to put in.




Modified by 201pro at 3:42 PM 10/17/2010

[Lea]

Good idea!

The newer Champs have the tool holder molded into the console in that general area. Very handy...and clever of you to think of those grommets!!

[SwampNinja]

[JeffA]

VERY slick!

[Parch07]

That is very clever!

[GregInAtl]

The best ideas are always the easiest! Well done, I will be stealing that!


Modified by GregInAtl at 8:42 PM 10/17/2010

[fastman151]

Great idea...thanks for the tip!!!!

[4508js]

COOL, looks good !!!!

[JC25]

I like it!! I leave mine in the TM tray along with my scissors and plug knocker.

[201pro]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by JC25 &raquo;</td></tr><tr><td class="quote">I like it!! I leave mine in the TM tray along with my scissors and plug knocker. </td></tr></table>

I used to use the TM tray, but mine kept getting wedged in under the pedal when I would run...