Model Number - E225DPXSDR Serial Number - 05131730
Motor will trim up at the motor with the switch on the motor, but it will not trim up with the switch on the throttle. It trims down correctly on both switches. Anything I should look for? Thanks alot for any help you can give me.
Make sure the ble lead coming out of the control is plugged in good. If that is not it it could be a bad rocker switch in the handel. They are not that bad to change I have done a few. Switch will cost you around 30 bucks give or take. Its been 8-9 years since I've done one.
You should also test the switch before you tear it apart. If the switch is good you should have 12.5 -13.5 vdc between the blue lead and the negative side of the battery.
Hope this helps
Reply With Quote