Results 1 to 3 of 3
  1. #1
    Moderator
    Join Date
    Jun 2004
    Location
    Miami
    Posts
    9,303

    looking for a part 87 50 hp evinrude

    Guys
    i have a friend with a pontoon boat
    87 50 hp evinrude
    model EJOTLCUD
    ser..g1421972
    i am looking for a power trim hose..i have not looked at it but he tells me it has 1 hose??????? which does not make sense...
    is it gettable...

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,177
    #2

    Re: looking for a part 87 50 hp evinrude (Rollo331)

    Chuck,
    Better tell your friend to grab some Nitro, Yep you can still get the hose and the lines, but The Top line to the Tilt Cylinder is 0172838 and has a suggested list of $176.00 . The two other lines are Metal and should be ok the Lower tilt line is 0172872 list $80.74 and the Line for the trim lower is 0172672 List $ 39.30. Hope this helps. On the upper hose I'd pull it off and see if a hydraulic shop in town could make up a new hose.

  3. Moderator
    Join Date
    Jun 2004
    Location
    Miami
    Posts
    9,303
    #3

    Re: looking for a part 87 50 hp evinrude (ChampioNman)

    thanks fred,i am going to call him today and see what the heck he needs..........

Similar Threads

  1. 1992 Evinrude Intruder 175 help locating part
    By tsamp08 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 03-18-2012, 04:56 AM
  2. Evinrude Ficht 225 - Fix it or Part it
    By Fishoutback in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 03-12-2010, 03:37 PM
  3. Need part for older Evinrude 50HP
    By vorvon46 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 01-20-2010, 09:54 AM
  4. Need part no. for Mercury to Evinrude prop hub kit.
    By TW in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 07-01-2007, 05:48 AM
  5. Evinrude 150 Intruder Problem Part 2
    By bperdue21 in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 06-15-2007, 12:16 PM