Thread: TACH ???

Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Mar 2008
    Location
    Dagsboro
    Posts
    171

    TACH ???

    Hey Guys been a while ....

    Ok I have a 99 21SS Extreme and need a new Tach 5" C&O says they are no longer made. Ok you know the question "where can I find another?"

    Mine is showing approx 1000 RPM too high.

    Hope all had a great summer and thx in advance ..... PJ
    Hold-em tight and give-em lotsa slack !!!

  2. Member
    Join Date
    Jun 2004
    Location
    Dickson Co
    Posts
    6,425
    #2

    Re: TACH ??? (pjmartin947@mchsi.com)

    We're working on getting a rather large order of 5" units made......we have no source otherwise.



  3. RIP Evinrude 1907-2020 JR19's Avatar
    Join Date
    Feb 2005
    Location
    Columbia, KY
    Posts
    13,419
    #3

    Re: TACH ??? (pjmartin947@mchsi.com)

    What brand tach is it...If it is a Faria gauge send it back to them. If it is a 5"system check tack it will set you back about $180 if you buy a new one. If you send it back to Faria and it is less than 24 months old they replace it for free. Anything over 24 months will cost $75 for a new systems check tach.

    They carry a limited lifetime warranty on all their guages. If my memory is correct I got my nine year old water pressure gauge replaced for only $15...Faria will replace it for free under 24 months. Older than 24 months it will cost about 1/3 of what a new gauge sells for at a dealer...they stand behind their gauges

Similar Threads

  1. Tach
    By 2000yamaha150 in forum Yamaha Motors
    Replies: 2
    Last Post: 12-31-2010, 03:23 PM
  2. OMC Tach
    By k2rider18 in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 10-23-2008, 06:02 AM
  3. Tach
    By DavesZ21 in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 08-20-2007, 02:59 AM