I just bought two HDS units from Brian @ BBG. I am going to remove my 135's and the Globalmap. Problem is, what to do with the 1 in hole left in the transom area where the antenna puck was mounted. Is there anything out there to cover it?
I just bought two HDS units from Brian @ BBG. I am going to remove my 135's and the Globalmap. Problem is, what to do with the 1 in hole left in the transom area where the antenna puck was mounted. Is there anything out there to cover it?
I would use that same hole, mount seperate GPS receivers, one on the transom and one on the bow, that way your waypoints will be more accurate.
________________________________________________
2024 Phoenix 21 XE - Mercury 250 PRO XS Serial #3B429919
2017 Phoenix PHX 21 - Yamaha 250 SHO
2010 Skeeter 20i - Yamaha 250 SHO
1988 Procraft 1780 Competitor - Mercury 100
call lowrance or find someone here to get a puck that does not work anymore and put there. thats what i did. i have 2 mounted.
I think the new secret color is "A-Rig"..........
I just left the puck there and disconnected it. It's not in the way of anything.
That is a good idea MD. I already have pump outs, so that is out. I need to use the puck when I install the globalmap on my Tin boat. Thanks evryone
Ok, now for the question. Does anyone have an old Lowrance antenna puck that does not work that they would sell?
You could also get a Clam shell hole cover made by Perko..
BTW, i got one from lowrance. i paid them $10 for it shipped
Check with a local dealer. I bet they have one laying around. We always did.
What are you gonna do with the 135's?
I'm going to put one on my Tin boat and probably sell the other one. I'm not sure about the Globalmap
Reply With Quote