Talon wiring question

[munter77]

Guys - getting ready to pull the trigger on a Talon but I wanted to get info on how skeeter guys are running in the power wire to the cranking battery. with the single tube bundle coming from the motor to the boat, I don't see an obvious spot to run the new cable other than drilling a new hole which I'm not crazy about doing. Can anyone let me know how they've installed theirs on a skeeter??

thanks!

[Skeeter185]

Don't have a talon or powerpole but do have a skeeter. At the back of the boat you will see a plastic cover about 10 inches long over the rubrail. Take it off and pull the ends of the rub rail back. Mine had a hole drilled through under the rub rail at this spot. If yours doesn't it's very easy to drill one thru and run your power wire. Then pop the rub rail ends back in and replace cover and it will be a tidy install.

[munter77]

thanks alot! I'll try take a look tonight to see what it looks like. I appreciate the help!!

[Skeeter185]

Your welcome